About Gulf Coast Testing

Test SitePosted: 6/6/2013

 

GCT's test site is located in Prairieville, Louisiana is located on an ideal piece of property situated in a neighborhood of approximately 450 homes, and is completely fenced with a 10 foot privacy fence for security. The site is located approximately five miles down Interstate 10 from our Baton Rouge office.

The GCT dosing system is a state of the art computer driven system. GCT utilizes three Siemens controllers to dose the aerobic treatment units pursuant to the Standard. Additionally, we have a dual grinder pump system for the neighborhood only influent wet well for redundancy in our operations.

Raw wastewater is pumped wet well fed by a neighborhood subdivision to an influent tank located on our testing facility by the grinder pumps. Dosing pumps located within the influent tank feed the raw influent through a manifold and valve system to each aerobic treatment unit at five gallon increments until the correct dose is administered pursuant to Standard. The entire valve system is operated by three Siemen controllers for accuracy and reliability.

We collect the samples and transfer the samples to our wastewater laboratory located on the test site. Our laboratory can easily perform all the tests required by the Standards pursuant to Standard Methods for the Examination of Water and Wastewater or an EPA approved method. We also provide additional testing services outside of the Standard that may be required by various regulatory jurisdictions, including but not limited to bacteriological testing and/or nutrient testing beyond the Standard.

In the event a client requests a test our laboratory does not perform, we have relationships with several NELAC approved laboratories, and GCT will contract those tests at the lowest possible rates.

We also perform all equipment evaluations pursuant to Standard 46 at the Prairieville test site.

Photo Gallery              Installation Photos

Key PersonnelPosted: 1/21/2016

 

Our professional staff combines experience and leadership from positions in major engineering, industrial and commercial companies. This broad base of expertise provides a diversity of skills and personal knowledge to handle all of your design, testing, and certification issues.

GCT employs and partners with a select group of professionals to bring superior and relevant service to our clients. The following are some of the key personnel:

William Daniel, PE - Program Manager

Eric Holland - Laboratory Manager

Contact InformationPosted: 1/21/2016

 

Telephone 225.612.1987
Fax 225.612.1988
Office Address 17170 Perkins Road
Baton Rouge, LA 70810
Map & Directions
Test Site Address 14378 Park Avenue
Prairieville, LA 70769
Map & Directions
Program Manager William Daniel  225.281.3792
william.daniel@gctla.com
Lab Manager Eric Holland   225.397.0633
eric.holland@gctla.com